Is Drano Safe to Use?

Running water drains down a stainless steel sink

When faced with a stubborn clog, many homeowners reach for a bottle of Drano. It’s cheap, easy to use, and promises to clear drains in minutes. But is it really safe for your plumbing?

At WeCo Rooter, we’ve seen what happens when homeowners rely too much on chemical drain cleaners, like Drano, and let’s just say — those 2 AM service calls aren’t exactly the ‘quick fix’ people were hoping for.

Before you pour that bottle down your sink, let’s talk about how Drano works, when to use it (and when not to), and safer alternatives for keeping your pipes clear.

How Does Drano Work?

Drano is a chemical drain cleaner designed to dissolve clogs caused by hair, grease, and soap scum. Its active ingredients, sodium hydroxide (lye) and aluminum, create a heat-producing reaction that breaks down blockages.

Sounds great, right? Not so fast.

While Drano may seem effective for minor clogs, it’s not a magic fix for every plumbing issue. In fact, plumbing specialist Yaeir Moinzadeh warns that using Drano too often can actually “damage your pipes and even cause injury if it splashes back.”

So when should you use it — and when should you run the other way?

When to Use Drano and When to Avoid It

Drano can be useful in certain situations, but it’s important to know when to avoid it.

Safe Uses for Drano:

  • Minor clogs in bathroom and kitchen sinks
  • Slow drains caused by soap buildup
  • Hair-related clogs in showers (but only occasionally!)

When You Should Never Use Drano:

  • Toilets – The heat from Drano can crack the porcelain and damage toilet components. Get residential bathroom services instead. 
  • Garbage Disposals – The harsh chemicals can corrode disposal parts. Stick to professional kitchen plumbing services. 
  • Septic Systems – Drano can kill the beneficial bacteria in your septic tank, disrupting the breakdown of waste
  • Recurring Clogs – If your drain keeps clogging, Drano is only a temporary fix. The real problem may need expert drain cleaning.

 If you’re dealing with a serious clog, skip the chemicals and call WeCo Rooter instead!

What to Use Instead of Drano

Instead of relying on harsh chemicals, try these safer and more effective alternatives:

1. Baking Soda & Vinegar

Pour ½ cup of baking soda down the drain, followed by ½ cup of vinegar. This reaction creates carbon dioxide gas, which helps break down debris. Let it fizz for 30 minutes, then flush with hot water. Great for minor clogs and routine maintenance! Let it fizz for 30 minutes, then flush with hot water. Great for minor clogs!

2. Plunger

A good old-fashioned plunger isn’t just for the toilet — it can be used to unclog a shower drain or sinks too. For best results, ensure a tight seal around the drain and use firm, quick plunges to dislodge the clog.

3. Drain Snake 

Try manually removing hair and debris from your pipes using a drain snake. There are handheld and motorized versions available; handheld options are great for small clogs, while motorized augers work well for deeper blockages.

4. Hydro Jetting (for Stubborn Clogs)

High-pressure water blasting clears out deep clogs and pipe buildup. Learn more about WeCo Rooter’s hydro jetting services.

Already tried these, and still having trouble? Professional drain cleaning services use advanced tools like hydro jetting and drain cameras to remove stubborn clogs and identify underlying issues.

How to Know When It’s Time to Call a Plumber

If your drain is still clogged after trying multiple solutions, it’s time to bring in the pros.

Call a plumber if:

  • Multiple drains in your home are clogged at once.
  • Water backs up in the sink, tub, or toilet.
  • There’s a foul odor coming from your drains.
  • You’ve used Drano multiple times with no success.

Is it an emergency? Don’t panic — clogs can range from minor annoyances to urgent plumbing problems. If water is overflowing, drains are completely blocked, or sewage is backing up, it’s time to call an emergency plumber immediately. That’s why WeCo Rooter is available 24/7 to handle your drain problems.

Don’t wait, schedule a service today!

Final Thoughts: Should You Use Drano?

For minor clogs? Better to use a natural alternative.

For frequent or serious drain issues? Definitely not — call the pros.

If you’re dealing with persistent clogs, slow drains, or mystery plumbing problems, skip the Drano and call the experts. WeCo Rooter’s professional drain cleaning services will fix the problem without damaging your pipes.

Schedule a professional drain cleaning today:

Water Pressure: Everything a Homeowner Needs to Know

Shower head with low water pressure
Close up of a partly clogged shower head in a bathroom, causing it to putting out so little water

Have you ever stepped into the shower, excited for a relaxing moment, only to feel like you’re being drizzled on by a leaky garden hose? Or maybe your sink faucet is blasting water out like it’s trying to fill a pool in five seconds. Yep, that’s water pressure at work — too little or too much of it can turn your plumbing into a daily frustration.

At WeCo Rooter, we know that dealing with pressure issues can be a real headache. But don’t worry — we’re here to break it all down for you. Let’s explore how water pressure works, what affects it, and how to fix it.

What is Water Pressure and Why Does It Matter?

Water pressure is the force that pushes water through your pipes and out of your fixtures. It’s measured in PSI (pounds per square inch), and the sweet spot for most homes is between 40 – 60 PSI. Too high, and you risk damaging your pipes and fixtures; too low, and you’ll be begging your showerhead to work harder.

Good pressure levels mean:

  • A strong, steady shower stream.
  • The washing machine and dishwasher fill up efficiently.
  • No weird noises or bursts of air when you turn on the tap.

Bad pressure, on the other hand, can turn even the simplest tasks — like rinsing dishes — into a challenge. 

Common Causes of Low or High Water Pressure

Water pressure issues don’t happen out of nowhere. Here are some common culprits:

1. Clogged Pipes

Over time, mineral deposits and debris can build up in your pipes, restricting the flow of water. Think of it like a coffee stirrer trying to handle a milkshake — it’s just not going to work. Regular drain cleaning services can help keep your pipes clear and strengthen your water flow.

2. Faulty Fixtures

Sometimes, the problem isn’t with your plumbing but with the fixtures themselves. Old, corroded, or clogged fixtures can slow water flow. Check out this helpful article from Bob Vila about the 10 best shower heads for your ideal pressure settings. 

3. Problems with the Main Water Supply

If your entire neighborhood is experiencing low pressure, it might be an issue with the municipal water supply. On the flip side, high-pressure problems could stem from water being delivered at higher-than-normal levels. Not sure who your water supplier is? Check your water bill! 

4. A Broken Water Pressure Regulator

For homes with a pressure regulator (a device that controls the PSI), a malfunction can send your water pressure soaring — or plummeting. These devices are incredibly helpful, but like all things, they don’t last forever.

How to Fix Low Water Pressure in Your Home

Low flow pressure doesn’t have to be something you just live with. Here are a few steps to improve your water flow:

  • Check for Clogs: Remove and clean clogged shower heads and faucets. Soak them in vinegar to break down mineral buildup. Cloggs too stubborn for a DIY fix? Try hydro-jetting
  • Inspect the Pressure Regulator: If you have one, make sure it’s set correctly. A professional plumber can help adjust or replace it if needed.
  • Install a Booster Pump: For extreme cases, a booster pump can increase water flow strength for your entire home.

When to Consider a Water Pressure Regulator

If your water flow is too low or too high, it’s time to think about a regulator. This handy device keeps your pressure in the safe zone (40 – 60 PSI), protecting your pipes and fixtures from wear and tear.

Pro Tip: Not sure if you already have a regulator? Check near your water main line. If you don’t have one, it’s worth investing in. 

Need help locating it? Let us help!

Signs You Need to Call a Professional for Water Pressure Issues

Sometimes, it’s best to leave the pressure problems to the pros — like us! Here are some signs it’s time to pick up the phone:

  1. Unexplained Low or High Pressure: If you’ve tried it all and nothing’s working, there could be a bigger issue with your plumbing system.
  2. Leaking Pipes or Fixtures: High water pressure can cause leaks, while low pressure might point to hidden damage. Prevent leaks before they happen with leak detection.
  3. Water Pressure Regulator Problems: If your regulator is acting up, it may need repairs or replacement.
  4. Inconsistent Pressure: If the water pressure can’t make up its mind, it’s probably not something you can fix with a wrench. If you’re facing an emergency, our emergency plumbing services are here to help.

We’re here to help: Call the pros!

How WeCo Rooter Can Help

At WeCo Rooter, we’ve seen it all — clogged pipes, faulty regulators, you name it. If your water pressure isn’t cooperating, don’t sweat it. Our experts can quickly diagnose the problem and get your plumbing back on track. Ready to take control? Schedule a service with us today.

Your Water Pressure, Your way

Water pressure doesn’t have to be a mystery or a nuisance. Whether you’re dealing with a weak drizzle or an overly enthusiastic faucet, understanding the causes and solutions can make all the difference. And remember, you don’t have to tackle these issues alone — WeCo Rooter is here to help.

Let’s make 2025 the year of perfect flow strength in your home. Give us a call today and say goodbye to pressure problems once and for all!

Rusty Toilet Bolts? Causes, Fixes, and Prevention Tips

of WeCo Rooter team member servicing a toilet in a home.

Have you ever noticed those bolts at the base of your toilet turning an unpleasant rusty shade? Maybe you’ve brushed it off thinking, “It’s just the bathroom; no one’s looking down there anyway.” But here’s the thing: rusty toilet bolts are more than an eyesore — they can weaken the stability of your toilet and lead to costly issues like leaks.

At WeCo Rooter, we’ve seen it all, and we’re here to help. Let’s break down why toilet bolts rust, how to fix them, and how to keep your toilet secure and rust-free.

Why Do Toilet Bolts Rust, and Why Should You Care?

Toilet bolts are exposed to constant moisture, which makes them a prime candidate for rust. Here’s why it happens:

  1. Moisture and Humidity: Bathrooms are damp environments, and all that moisture can corrode metal bolts, especially if they’re not rust-resistant.
  2. Leaks Around the Toilet Base: Even a tiny leak can pool water around the bolts, accelerating rust and creating a breeding ground for mold growth.
  3. Old Hardware: Older bolts often lack protective coatings, making them more susceptible to rust over time.

While rust might seem harmless at first, it can weaken the bolts holding your toilet in place, leading to wobbling and, eventually, leaks. If left unaddressed, you could turn into bigger issues, including floor damage that requires emergency plumbing service

How to Replace Rusted Toilet Bowl Bolts

The good news? Replacing rusty toilet bolts is easier than you think. Follow these steps:

  1. Turn Off the Water Supply: Shut off the valve behind your toilet and flush to empty the tank. This prevents water from spilling while you work.
  2. Remove the Old Bolts: Use a wrench to unscrew the bolts. If they’re too corroded to budge, spray them with penetrating oil or carefully cut them off with a hacksaw.
  3. Clean the Area: Wipe away any rust residue or grime to ensure a clean surface for the new bolts.
  4. Install New Bolts: Use stainless steel or brass bolts for durability, and secure them snugly. Don’t overtighten — they should hold the toilet firmly without cracking the porcelain.
  5. Reconnect the Water Supply: Once everything is in place, turn the water back on and test for stability and leaks.

For more detailed instructions on toilet replacement and bolt installation, check out this helpful guide from Family Handyman

If this sounds like more than you’re ready to tackle, don’t sweat it — WeCo Rooter is here and ready to help!

Preventing Rust on Toilet Bolts in the Future

Once you’ve replaced rusty bolts, a little maintenance can go a long way toward preventing the problem from coming back. Here’s how:

  1. Choose Rust-Resistant Bolts: Stainless steel or brass bolts are less likely to rust than standard steel ones.
  2. Seal the Toilet Base: A properly sealed toilet base keeps water from pooling around the bolts. Consider using caulk or a gasket for extra protection.
  3. Fix Leaks Immediately: If you notice water around the base of your toilet, don’t wait — address the leak to prevent rust and other damage.
  4. Keep the Area Dry: Wipe down your bathroom floor regularly and clean up any spills or puddles promptly.

A little preventative maintenance now can save you from dealing with rusty bolts — and wobbly toilets — later.

How Tight Should Toilet Tank Bolts Be?

When tightening toilet bolts, it’s all about finding the right balance. Too loose, and your toilet will wobble; too tight, and you risk cracking the porcelain.

A good rule of thumb is to tighten the bolts by hand until they’re snug, then give them an extra quarter turn with a wrench. If you hear creaking or feel resistance, stop — you’ve gone tight enough.

How WeCo Rooter Can Help

Rusty toilet bolts are more than just a minor inconvenience — they can lead to leaks, instability, and even structural damage if left unchecked. Whether you’re dealing with stubborn rust, a wobbly toilet, or more extensive plumbing issues, our full bathroom services can handle it all. From repairs to upgrades, WeCo Rooter helps get your bathroom back in shape. 

Schedule service with us today, and let us take care of the dirty work so you don’t have to.

Goodbye, Rust — Hello, Stability!

Dealing with rusty toilet bolts might not be the highlight of your week, but it’s a small fix that can prevent bigger problems down the road. By replacing those bolts, securing your toilet, and taking a few simple steps to prevent rust in the future, you’ll keep your bathroom looking and functioning its best.

And remember, if you’d rather not DIY, WeCo Rooter is here to help. Call us today or schedule online, and let’s flush away those plumbing worries together!